|
Post by Jonathan A. on Oct 28, 2014 16:27:36 GMT -5
Here are the 2 fans I have saved from a house that is now demolished: Hunter Infiniti: www.youtube.com/watch?v=c-r72Nr8A44Hampton Bay Alchemy: www.youtube.com/watch?v=kthuUoAuP7QI also got a remote kit from that house, as shown in a video of Hampton Bay Alchemy. Both of these videos also show pictures of fans and a house I got these fans from. I have to say that Hampton Bay Alchemy blows more air than Hunter Infiniti, it has an 188mm X 15mm motor with 14° pitch. Hampton Bay Alchemy seems to be rare since no other collectors seems to have it, but I've seen some on Craigslist. Watch the videos for more info.
|
|
|
Post by fancollector12 on Oct 28, 2014 17:41:02 GMT -5
According to the file number on the Hampton Bay, it's made by Sheng Yuan/Alaska.
|
|
|
Post by Jonathan A. on Oct 28, 2014 18:04:23 GMT -5
According to the file number on the Hampton Bay, it's made by Sheng Yuan/Alaska. That's what I said in video description.
|
|
|
Post by Max C. on Oct 29, 2014 17:19:04 GMT -5
Awesome that you finally had the chance to save these! What is the UL file listing on the Hampton Bay Alchemy?
|
|
|
Post by Jonathan A. on Oct 29, 2014 17:56:54 GMT -5
Awesome that you finally had the chance to save these! What is the UL file listing on the Hampton Bay Alchemy? You can see it in end of the video.
|
|
|
Post by Max C. on Oct 29, 2014 23:37:13 GMT -5
Awesome that you finally had the chance to save these! What is the UL file listing on the Hampton Bay Alchemy? You can see it in end of the video. Yup, E133787. Very unusual that Hampton Bay and Minka Aire choose Sheng Yuan instead of Air Cool.
|
|
|
Post by Jonathan A. on Oct 30, 2014 21:10:39 GMT -5
You can see it in end of the video. Yup, E133787. Very unusual that Hampton Bay and Minka Aire choose Sheng Yuan instead of Air Cool. It seems like some of other Minka Aire fans are made by Sheng Yuan like Ultra and Viper. By the way, about the label saying to keep set screws tight, it should have also said about the pin if it's going to say about set screw (downrod screws in that fan), pin will do a better job keeping the fan from twisting itself off while running on reverse, set screws will just reduce the chance of wobble.
|
|
|
Post by Farah on Oct 30, 2014 21:54:46 GMT -5
Very nice fans! What years they were made?
|
|
|
Post by Jonathan A. on Oct 30, 2014 21:57:45 GMT -5
Very nice fans! What years they were made? They are stated in video description.
|
|
|
Post by Jonathan A. on Nov 12, 2014 18:12:47 GMT -5
They started to build 2 new houses on that property:
|
|
|
Post by Jordan U on Nov 15, 2014 12:24:02 GMT -5
Very nice fans! What years they were made? They are stated in video description. Not everyone, including myself, always has the time to watch a video from beginning to end, especially if it’s a video that contains a lot of details. State it here too.
|
|
|
Post by Jonathan A. on Nov 15, 2014 12:33:22 GMT -5
They are stated in video description. Not everyone, including myself, always has the time to watch a video from beginning to end, especially if it’s a video that contains a lot of details. State it here too. I just want people to watch my videos. I make money out of them.
|
|
|
Post by Jordan U on Nov 15, 2014 16:02:48 GMT -5
Not everyone, including myself, always has the time to watch a video from beginning to end, especially if it’s a video that contains a lot of details. State it here too. I just want people to watch my videos. I make money out of them. That's not the way to do it, not a reason to be on a forum or to have a YouTube. I don't make money off of my videos, if I want more viewers, I make better videos. Personally, knowing that you just want to make money off of it would deter me from watching your videos. Lets say I do decide to get ad revenue off my videos, I would still make better videos which people would actually want to watch and share to other people, rather than forcing them to visit the page to get information which should be listed on the forum. YouTube is just a supplement to the forum, the forum is built to contain the information. Mods/admins if you don't like this post, I'll have no problems with you removing it, I just wanted to get my opinion out there because I find being here to make money is indecent.
|
|
|
Post by Farah on Nov 17, 2014 14:16:44 GMT -5
Nice fans! I Hope that you enjoy them.
|
|
|
Post by Adam D. on Nov 18, 2014 19:25:08 GMT -5
I make videos because I put my heart and soul into it.. Or at least I try, I don't do it to make money off of it, that's a secondary thing, and yes it's good to have an option to make some chunk change off of what I do, but regardless of ad-sense being available on YouTube videos or not, I'd still be posting videos..
It clearly shows which people take pride in what they do, and which people take videos to cram their channel up with pointless videos to up their Ad-Sense revenue... Enjoy it while you can, Adsense will get smarter and start choosing videos... They can already detect shaky and dark video, it will be a matter of time where at bot will detect armature vrs professional..
|
|