Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 16, 2013 22:10:10 GMT -5
I'll keep a lookout for a donor bracket for those little hooks. You could rig something, but the original design works well.
|
|
|
Post by Adam D. on Nov 16, 2013 22:29:41 GMT -5
Ok.. Thanks Dan...
|
|
|
Post by Matt B. on Nov 16, 2013 23:18:46 GMT -5
I will too, I believe there was a mounting plate or two at one of my habitats. That was a while ago though. I used to have a Low Profile identical to that, mine had the R&M tag on top, so I suppose yours is a tad bit newer. Awesome fans though. Still wish I had mine.
|
|
|
Post by Adam D. on Nov 17, 2013 1:45:53 GMT -5
Thanks Matt..
|
|
|
Post by Farah on Nov 20, 2013 14:33:22 GMT -5
great fans, Adam! I really like the dixie belle fans.
|
|
|
Post by fancollector12 on Nov 20, 2013 16:15:31 GMT -5
Nice fan! Considering that you already have the same model # fan in the Galleries, I'd say this one isn't needed in the gallery.
|
|
|
Post by Andrew G. on Nov 20, 2013 18:25:30 GMT -5
Considering that you already have the same model # fan in the Galleries, I'd say this one isn't needed in the gallery. This fan has its differences, such as the noticeably larger motor, real wood blades and isolation ring.
|
|
|
Post by Andrew G. on Nov 20, 2013 18:32:11 GMT -5
Here's some better pics... I went to storage and took screws off of a Studio Series.. Still I can't mount for showcasing seeing how it's missing the hardware to hang the motor assy to the bracket.. It doesn't have the Robbins & Myers label, but it is the same fan in this thread... In theory, you could borrow the mounting plate from your other Low Profile for the time being.
|
|
|
Post by Adam D. on Nov 20, 2013 19:02:44 GMT -5
Considering that you already have the same model # fan in the Galleries, I'd say this one isn't needed in the gallery. This fan has its differences, such as the noticeably larger motor, real wood blades and isolation ring. Yes as Andrew stats, this fan is going to have a different look to it due to what was pointed out..
|
|
|
Post by Adam D. on Nov 20, 2013 19:04:06 GMT -5
Here's some better pics... I went to storage and took screws off of a Studio Series.. Still I can't mount for showcasing seeing how it's missing the hardware to hang the motor assy to the bracket.. It doesn't have the Robbins & Myers label, but it is the same fan in this thread... In theory, you could borrow the mounting plate from your other Low Profile for the time being. I could do that.. Just got to locate it in a storage box, under a bunch of other storage boxes.. But Dan has already found some mounting hardware, so I would just need the switch housing cap from the other fan.. Hopefully I can find one eventually to make this one complete..
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 20, 2013 23:40:07 GMT -5
Buy a sheet of brass, cut a circle, drill two holes, bake it to darken it.
|
|
|
Post by Adam D. on Nov 21, 2013 14:44:38 GMT -5
that sounds like a great idea with other fans.. But I'd like to have one with "Hunter" stamped into the cap..
|
|
|
Post by Adam D. on Nov 28, 2013 4:17:10 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 28, 2013 12:19:56 GMT -5
That Lasko would be worth getting if it were complete.
|
|
|
Post by Adam D. on Nov 28, 2013 13:25:53 GMT -5
It is complete. Note the sticker..
Does anyone have any info on this? I think I've seen a picture of this before or something..
|
|