|
|
Post by Jean Lemieux on May 23, 2014 21:31:17 GMT -5
That's a very cute Nadair. It's very clean and glossy. Only the light doesn't look good on it. The blades are not skinny at all. It's just an illusion that the rounded tips enforces.
Nadairs of the age are always dated?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 23, 2014 21:51:23 GMT -5
This one had a sticker on the top '' 06/ 92''
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 23, 2014 21:54:15 GMT -5
And for the light kit,
The fan will sell faster if it has a light kit,
I know it's not that perfect, but it doesn't look that bad
|
|
|
|
Post by Max C. on May 23, 2014 22:10:25 GMT -5
That's a very cute Nadair. It's very clean and glossy. Only the light doesn't look good on it. The blades are not skinny at all. It's just an illusion that the rounded tips enforces. Ah I see. What's wrong with the light? It looks cute in my opinion. And for the light kit, The fan will sell faster if it has a light kit, I know it's not that perfect, but it doesn't look that bad Exactly! This is part of the reason I try to avoid selling fans at my ReStore without light kits. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 26, 2014 17:44:27 GMT -5
2007 canadian tire catalogue  In store this week, 10 fans and a lot of light fixtures    |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 26, 2014 17:46:29 GMT -5
1100th post and 1100th reply for myself !
Again, thanks guys for your support and comments.
I'm always happy to present you some canadians fans you've never saw!
|
|
|
|
Post by willym14 on May 26, 2014 17:53:53 GMT -5
Do the Canadian SMCs work in America?
|
|
|
|
Post by Jonathan A. on May 26, 2014 17:59:30 GMT -5
Do the Canadian SMCs work in America? Of course they do. Both of these countries have 120V 60HZ power supply. |
|
|
|
Post by Farah on May 29, 2014 13:23:51 GMT -5
Nice ceiling fans! I really like the ge vent white fan!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 31, 2014 20:09:01 GMT -5
From last week-end, This set of blades I don't know anything about it, brand ? model ?  28th, 2007 Mainstays / wal mart hugger white/bleached oak blades canderela bulb  Fan came in this Uberhaus box, from Rona  And for this week, This is what I got in 4 days... 5 fans !  29th, 2000 Canarm Mystic in white and Pb    30th, Undated Smc Park Avenue No sticker on motor top How I got it  How I sold it   31st, 2006 Smc-Airworks park avenue   32nd, First of two, 1986 Banvil in polished brass. Finish is tarnished,   33rd, two of two, 1986 Banvil in polished brass Finish is less tarnished than the first one.   34th, 1996 NIB Smc    In store this week, Double duet  |
|
|
|
Post by JW on Jun 1, 2014 9:27:51 GMT -5
I believe those funky blades go to an Emerson DC Designer.
|
|
|
|
Post by Farah on Jun 1, 2014 11:51:43 GMT -5
Nice fans! I really like the two ge vent fans.
|
|
|
|
Post by Rick M. on Jun 4, 2014 23:41:43 GMT -5
Wow, you've gotten some really neat stuff since I checked last! I love those two Banvil GE-vent fans.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 21, 2014 6:47:21 GMT -5
Good morning everyone, I went to a relative's house, and had a chance to picture the fan in his dinning room. It's original to the house, 1989-1990 It's a Nadair, but I don't know the model It's in the middle of the house, in the middle of the vaulted ceiling, over the dinning table Each time I went there, the fan was spinning on low, reverse One of the blade fell when the fan was spinning, and the speed pull is broken too. It will be replaced at the same time as kitchen remodel. *pay attention to the matching light.    I also got the next box... full of clothes 4 seasons venair, from 1980 (+-2 years)   35th, 1994 CANARM CONTEMPRA WH nothing special about it, plain white fan  36th, 1992 HERITAGE HUGGER painted motor housing, didn't kept it  37th, 1987 HARBOUR BREEZE top mount spinner please excuse the quality of the picture. light kit not original, The fan had a capacitor issue.  38th, 1994 SMC The fan didn't had the light cover and had paint on it, decided it was not worth the wait.  39th, 2001 CANARM IMERIAL BPT fan had rust on all metal pieces I was unable to balance the fan and it was not just a slight wobble.  |
|
|
|
Post by Jean Lemieux on Jun 21, 2014 23:21:42 GMT -5
That a beautiful Nadair model. I've seen another Nadair with a broken bracket too. These short brackets trend to bent a lot at the point of breaking. Those wide Nadair blades were pretty heavy. Awesome the 4 Saisons box! It's one of their early box for spinners without switch housings. According to the box it would be a brown version of this: www.vintageceilingfans.com/membergalleries/gallery/showimage.php?i=1050&c=34But more realistically it would be a 90 cm version of this: www.vintageceilingfans.com/membergalleries/gallery/showimage.php?i=875&c=34Very cool how it says made in Canada. I guess all the packaging, choices of parts and probably even some assemblage was done in Montréal. Is there a side of the box en français? The Canarm Contempra looks in new condition. |
|
