Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 2, 2015 22:29:41 GMT -5
This week's sightings I was at one of my aunt's house. She sold it and here are the fans in it. Westinghouse Xavier II, bought in late 2014 *I realised that one of the blades was on the wrong side... as you can see in the picture Alle the blades are showing the graphite side, except for the one that shows the weathered maple side  Before the fan was a pendant light. Master bedroom Hunter Canadiana, also installed in late 2014. fan was on low, reverse  This fan replace a 2009 Canarm Summit, which my aunt gave me and I will bring it to my restore in the next few days. the summit replaced something like this, She had the white/brass fan for more than 20 years.  (Picture from kijiji) In the second bedroom, this Canarm Catalyst II Bk. Fan was on low, reverse  In the third bedroom was now a flushmount light. When I was young, it was a fan like the white/brass one but with a 3lights, turtle style fitter. And in the dinning room was a fan like this one,  (Picture from Kijiji) It was removed during the kitchen remodeling around 2008. ------- At another one of my aunt's house. In the solarium, built somewhere around 2008-9 This fanimation Belleria   |
|
|
|
Post by Jean Lemieux on Mar 2, 2015 22:34:55 GMT -5
Yes, that's what I figured about the blades on the display other than vandalism. At my store, the Canarm CP56 doesn't have the 3rd blade.
At least she kept one of the older Canarm. A black one too.
The Fanimation is very nice. I love the shades she chosed with the parrots.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 2, 2015 23:01:20 GMT -5
Well Jean a lot of fans are " vandalised ". I see that every time I go to Home depot.
It seems like they like to bend all the blades on every fans...
I really like the Belleria, It was the first time a saw a Fanimation and I was impressed
|
|
|
|
Post by Jean Lemieux on Mar 2, 2015 23:12:04 GMT -5
Well Jean a lot of fans are " vandalised ". I see that every time I go to Home depot. It seems like they like to bend all the blades on every fans... I really like the Belleria, It was the first time a saw a Fanimation and I was impressed Since they have those lowed stepped displays it's too easy to reach the fans. Before on flat displays, the fans would stay much more in good condition and could spins sometimes. Do you know where she bought here Fanimation? |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 3, 2015 8:52:33 GMT -5
I don't remember exactly I think it was somewhere around Valleyfield
|
|
|
|
Post by Jordan U on Mar 3, 2015 15:41:03 GMT -5
I've heard those Westinghouse Xavier fans are pretty good quality.
The Fanimation is really nice! I imagine it doesn't move a whole lot of air installed that close to the ceiling with those blades though...
|
|
|
|
Post by Max C. on Mar 3, 2015 17:20:18 GMT -5
Max, I don't go very often to Wal Mart... I will try my best next time I'm there.. Fair enough. Thanks though  |
|
|
|
Post by Noah C on Mar 4, 2015 6:00:49 GMT -5
I've heard those Westinghouse Xavier fans are pretty good quality. The Fanimation is really nice! I imagine it doesn't move a whole lot of air installed that close to the ceiling with those blades though... No they do not move much air with those blades, but with those traditional blade selections available, the bellerias produce a higher quantity of airflow for its size, as do the islander and windpointe models. And the Westinghouse Xavier is actually a poor quality fan, having had a friend that had one I would utilize when I came. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 16, 2015 12:51:40 GMT -5
5th, 1999 Canarm Catalyst II Wh. Fan was a bit yellowed but not enough to trash it. It was missing 2 of the 3 rings on the lights, so I used a spare switch cap I had and a single light fitter, I think it's not that bad ! Tell me what you think    6th, 2010 Like wise/Canadian tire hugger 100% complete with light bulbs, a co-worker wanted it plain black blades on one side, black marble effect on the other  7th, I totally forgot to look at the sticker for the year, but it's from 1994 to 1997 Canarm - Designer's choice   In store this week,  |
|
|
|
Post by Jordan U on Mar 16, 2015 15:00:27 GMT -5
I like it better with the single light actually, it goes with the clean, seamless look better.
|
|
|
|
Post by Jean Lemieux on Mar 16, 2015 15:24:29 GMT -5
Yes, the Canarm Catalyst II looks good wth the mushroom light. It's good that you were able to use a smaller fitter and not a large one.
For the 3rd fan you probably meant Decorator's Choice. It's the same as Harbour Breeze from Distribution aux consommateurs.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 16, 2015 19:31:41 GMT -5
Thanks Jordan you're right !
Jean, thanks for your good comments and also for the brand, thanks for the infos !
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 23, 2015 18:09:46 GMT -5
8th, 1993 SMC Park Avenue *light covers aren't original ** fan had the cane side of the blades facing down   9th, 1997 CANARM Mini-contembra, or the earliest version of the Mini-builder, The fan had a Nadair light kit. *fan seems unbalanced but it was perfectly running on High,   10th, Late 80's NADAIR canopy covered in paint, other side of the blades has paint too  I made this week a spot where my coworkers can install the fans in the week so that I can test them when I work. I made it quite fast, Just because it's temporary This part of the store will be under remodeling soon and this will go    |
|
|
|
Post by Jordan U on Mar 23, 2015 19:52:21 GMT -5
That spinner is awesome! I love it. The SMC is nice too. The blades look all out of pitch alignment, in the last picture of it some of them even look backwards pitched.
|
|
|
|
Post by Jean Lemieux on Mar 25, 2015 16:12:31 GMT -5
The SMC Park Avenue looks good with theses shades.
That is a Mini-Contempara. The brackets does look odd and they are ivory. The Mini-Builder in the 1990's had GE vents.
Wow, I've never seen a Nadair spinner in this size with cane blades and in brown! What size is this? 107 cm or 120 cm? With this motor I've only seen them in white, 90 cm with stencil blades. Does it work well?
I don't recognize that part of the store.
|
|
