Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 3, 2014 13:21:04 GMT -5
I don't know what was wrong with the smc
every smc i've worked with had a hum
Someone can buy the High lite and repaint the brass parts,
the white parts were in good shape
|
|
|
|
Post by Farah on Sept 3, 2014 13:42:11 GMT -5
Nice fans! I like the ge vent fan with the lighted motor housing. It's so cute I wish that I can have it.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 3, 2014 20:20:54 GMT -5
|
|
|
|
Post by Max C. on Sept 4, 2014 13:21:38 GMT -5
Thank you for the picture David. This is just hilarious! According to the sticker, the fan was made by Hong Kong China Electrical Company, which happens to be the manufacturer of my 2010 Hunter Augusta. I guess we can now conclude that "HunterBreeze" is actually a thing  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 14, 2014 16:01:19 GMT -5
Max, seriously I don't know if I should be affraid or laugh about that.
Are hunter the prestige collection of harbor breeze now ? Hahah !
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 14, 2014 16:01:35 GMT -5
60th, 1989 Smc Park Avenue I had to replace the speeds pull chain   61st, came with the 60th fan 1988 grey version of the park avenue (pictures next week) 62nd, Late 80's Banvil both speeds and reverse pull chains were broken wasn't worth it  The fan came in this box  63rd, Early 1990's smc scandinavian WH   and now for the boxes, Canarm twister's box, from the late 1990's, full of dishes  and this canarm seymour's box, from the early 2010's full of clothes  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 15, 2014 21:04:22 GMT -5
Remember that Canarm Monet with a broken light kit I got back in February ?  I got at the restore a ceiling light for it, I removed the bullets, and putted them on the fan,  I also got a RH interiors catalog, from 2013 with fans in it     |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 15, 2014 21:36:55 GMT -5
|
|
|
|
Post by Jean Lemieux on Sept 15, 2014 21:41:52 GMT -5
Cool! I didn't know those SMC Park Avenues were made as early as 1989. That must be the first year they made them in this version. It's the same year SMC started using lighter black motor made in China.
I guess you meant early 2000's for the SMC Scandinave.
That would have been the earliest Canarm Twisters in theses boxes. I remember theses green boxes in 1996 and 1997.
That's good what you did with the Canarm Monet. How was the light kit broken? The sockets seems in fine shape.
Restoration Hardware have some very cool fans. They are very expansive though. Their imitation of mid century Elge fans with influence from Indola fans is very good. My two favorite are the Modern Fan Co Industry and the Elge imitation.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 16, 2014 7:59:29 GMT -5
Jean,
I got 2 park avenues, the other one in Grey is from 1988
For the scandinavian, i'm not sure
let's say late 90's to early 2000's
If you look closer on the original monet's picture
one of the lights was broken and was glued to the fan
(the white spot on the switch cap)
I know RH has expensive products. I was looking at their furnitures and I was surprised to see how much they cost
|
|
|
|
Post by Farah on Sept 16, 2014 16:33:31 GMT -5
Nice fans! I hope that you enjoy them david.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 21, 2014 15:08:14 GMT -5
Thanks Farah ! As I always say, I still enjoy every fan I work with
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 21, 2014 15:08:46 GMT -5
Good afternoon guys, for you this week 61st, 1988 Grey Smc Park avenue  64th, 2001 Canarm something white/bleached oak blades   65th, 2007 Canarm Miranda ORB I got it without glass   Original Canarm's picture  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 21, 2014 15:09:32 GMT -5
And also, in store thiw week  |
|
|
|
Post by Jean Lemieux on Sept 21, 2014 16:06:08 GMT -5
That's rare to see an SMC from 1988 with a lighter black motor.
|
|
