dave
New Member
Posts: 2
|
Post by dave on Oct 27, 2009 12:25:54 GMT -5
this fan had the beige board the speed pot went bad(no ohms) i jumped together. had the pot running the fan slow when it stopped running.thats when the pot burn up. i jumped it out after could not get the fan to work. i checked across th 4 diodes and do not get a reading backwards are fowards. can they all be bad? the motor ohms around 182 ohms between the red and beige wire . is motor bad or the diodes bad what do i need to do pitch it lol. thanks!
|
|
dave
New Member
Posts: 2
|
Post by dave on Oct 27, 2009 16:17:37 GMT -5
I found the problem the fan light is ran from a wall switch the fan is ran by another wall switch. it also has a pull switch on the fan this was bad. i jumped it out now have lights and fan i still need to get a 5k pot it was bad also have it jumped out as well. still donot understand the diodes on the board. i thought i should have read somthing with my meter on in one direction or the other. oh well thanks anyway! when in doubt keep trying!
|
|