|
|
Post by spulaw on Mar 23, 2009 11:43:52 GMT -5
 I have a FASCO ceiling fan model 938 (with lamp) that I do not know how to connect. I have 4 solid copper wires (black, red, white and naked) coming out of the ceiling. The fan has black, blue, green and white wires (plus green ground). The light fixture housing attached to the fan hub has two white wires (wrapped together) and a blue and red wire (wrapped together) and the corresponding light fixture has only a white and black wire (with the white one connected to a little black rectangular box that also has a red wire coming out. Can anyone help? Thanks!
|
|
|
|
Post by thefanman84 "Elder Moss" on Mar 23, 2009 12:00:08 GMT -5
black goes with black,white with white,blue to red and green to bare wire. thats for the ceiling. is the light kit already connected?
|
|
|
|
Post by spulaw on Mar 23, 2009 12:32:23 GMT -5
Thank you so much. I have hte light kit but it is disconnected from the wires coming out of the fan hub intended for the kit.....
|
|
|
|
Post by spulaw on Mar 23, 2009 12:39:45 GMT -5
By the way, thre is a second green wire attached to the metal mounting bracket which I assume is another ground; should I connect that to the other green one with the bare copper wire?
|
|
|
|
Post by Cole S. on Mar 24, 2009 8:05:36 GMT -5
Yes, you connect both grounds with the copper wire. The rest of what Richard told you was correct.
|
|
|
|
Post by thefanman84 "Elder Moss" on Mar 24, 2009 12:19:23 GMT -5
glad i can help
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 26, 2009 0:16:36 GMT -5
Did the fan work as you had it connected? Blue and red together sounds weird.
|
|
|
|
Post by Cole S. on Mar 26, 2009 9:27:26 GMT -5
Blue and red is how our wiring works as well. It's wierd, but that's how the switch for separate light and fan, or two separate switches, would connect to make the light separate.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 27, 2009 0:47:00 GMT -5
I meant within the fan. Blue and red are usually the two speeds for the motor, OR one of the two is the light wire.
|
|
I have a FASCO ceiling fan model 938 (with lamp) that I do not know how to connect. I have 4 solid copper wires (black, red, white and naked) coming out of the ceiling. The fan has black, blue, green and white wires (plus green ground). The light fixture housing attached to the fan hub has two white wires (wrapped together) and a blue and red wire (wrapped together) and the corresponding light fixture has only a white and black wire (with the white one connected to a little black rectangular box that also has a red wire coming out. Can anyone help? Thanks! 
