Casablanca vari-speed control help

[fanfixerguy]

I have a Zephyr series variable speed controlled fan that did not turn. Replaced the dried up 10uf starting cap and now it runs but speed control will not slow it down. It will start on low but as soon as the control reaches a point it goes into hi and will not go back to slow. Anybody have a diagram/schematic of this unit? It may be missing something as someone did work on
it some time ago..screws missing.

I saw a post from Dan Spiffy about a Slumber quiet, but the diagram will not open. Thanks for any help!

[piercetheorganist]

Try this: ada19851985.proboards25.com/index.cgi?board=fans&action=display&thread=1198779495&page=1#1198779495

[Deleted]

It sounds like your slumber quiet electronics are going bad. You can first try replacing the potentiometer, with any other 5k 1watt pot, but usually with slumber quiet, when one thing goes, it's all going, so you have to replace it all.
You can buy a kit from Casablanca:

www.casablancafanrepair.com/HTMLFiles/do_it_yourself/TL_03_Spare%20Parts%20List/Electronics%20pages/SlumberElectronics.htm

Or upgrade it to three speed:

www.casablancafanrepair.com/HTMLFiles/do_it_yourself/TL_03_Spare%20Parts%20List/Electronics%20pages/3SpeedElectronicsP1.htm

Or just keep the fan on high and use a wall control.

You may be able to find these parts other places for cheaper. Boston Plus/Plaza lighting has good deals on Casablanca parts. Lamp Depot did too but they're going out of business.