|
Post by John "Rockin" Reed on Aug 2, 2007 20:07:04 GMT -5
This may be a little weird, but when I put the blades on my Palm-Air spinner, they looked out of alignment as shown below. Is there any way that they can be balanced? I was thinking of using a vice
|
|
|
Post by JW on Aug 2, 2007 20:24:49 GMT -5
Some of the brackets may be on upside-down. Try removing the blades and make sure the brackets all either bend up away from the motor, or down toward the edge of the motor. Then re-install the blades accordingly.
|
|
|
Post by jeremy on Aug 2, 2007 21:15:21 GMT -5
nice fan reed!!!! i was thinking the same thing what jw is saying about the brackets too when i look at the pics.
|
|
|
Post by John "Rockin" Reed on Aug 3, 2007 20:48:08 GMT -5
Thanks, Jeremy
I finally got the blades fixed, and that was easy to do since I did use a vice.
|
|