Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 15, 2007 17:33:00 GMT -5
I need to know how to open up a motor to a moss carribean breeze. i removed the blades and the little thread bolts in the motor came loose and are now rolling around inside the motor and i cant screw the blades back on  |
|
|
|
Post by forkfan on Apr 15, 2007 17:36:21 GMT -5
sorry i don't know,i never took apart my moss fan motor before,hope others here will help you
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 15, 2007 23:48:50 GMT -5
I know Dan or Adam will know.
|
|
|
|
Post by forkfan on Apr 15, 2007 23:56:13 GMT -5
yup,they should
|
|
|
|
Post by forkfan on Apr 15, 2007 23:57:45 GMT -5
did you try to unscrew the 3 screws on bottom of the spinner part of the motor? if not,try that
|
|
|
|
Post by Adam D. on Apr 16, 2007 0:20:15 GMT -5
those motors open from the top. You can see near where the blades mount the crack all the way around to where it opens.....
Adam
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 16, 2007 17:43:15 GMT -5
I removed those but could'nt figure out how to open the motor though, do you have to pry it open like most spinner motors?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 17, 2007 23:49:27 GMT -5
If anyone cares i got the motor open and was able glue the threads back on where the blades screw into. these motors come apart really easy. only thing now with this fan is the blades are VERY rusted, it looks like surface rust though, no holes or anything. im thinking of having the rust grinded off and re-paint the blades, or do the old trick of soaking them in vinegar for a few days and see if that works.
|
|
|
|
Post by Ben C. on Apr 18, 2007 7:27:19 GMT -5
Great, and good luck!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 18, 2007 12:54:17 GMT -5
thanks, i'll get some pics when i can.
|
|
|
|
Post by forkfan on Apr 18, 2007 14:26:05 GMT -5
rock on mike  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 18, 2007 18:18:01 GMT -5
I'm late . . . Adam is correct where the motors come apart and you have to pry it.
|
|
