|
|
Post by Adam D. on Dec 18, 2004 17:35:17 GMT -5
Added to view Fan Gallery....Check it out.....Adam
|
|
|
|
Post by Sean B. on Dec 18, 2004 19:33:04 GMT -5
Nice fan. The blade irons are interesting on it. By that I mean how they scoop down a little bit near the motor, then level out.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 18, 2004 21:34:03 GMT -5
Nice fan. The blade irons are interesting on it. By that I mean how they scoop down a little bit near the motor, then level out. Check out the Sears Emerson spinners with 3 blades . . . those have a much mroe pronounced dip. |
|
|
|
Post by Sean B. on Dec 18, 2004 21:45:49 GMT -5
Check out the Sears Emerson spinners with 3 blades . . . those have a much mroe pronounced dip. Yes I noticed that too... Maybe that is why I like that fan. Where is the cap. cover for it in the NuTone pic? |
|
|
|
Post by Adam D. on Dec 18, 2004 23:22:57 GMT -5
The NuTone did not come with the cap cover. There was probably a light kit on it at one time. I made my own cap as a prop to make it look better.
|
|
|
|
Post by Sean B. on Dec 18, 2004 23:29:43 GMT -5
The NuTone did not come with the cap cover. There was probably a light kit on it at one time. I made my own cap as a prop to make it look better. Oh ok, sorta like you did to that SMC? |
|
|
|
Post by Sean B. on Dec 18, 2004 23:30:36 GMT -5
The NuTone did not come with the cap cover. There was probably a light kit on it at one time. I made my own cap as a prop to make it look better. By cap. I meant capaciter. The fan I was talking about was the Sears Emerson Three Blade fan. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 19, 2004 1:52:30 GMT -5
The Nutone was missing the switch cap so Adam made a piece of cardboard to fit.
The 3 blade Sears in the background, I know Adam was repairing one at one point, chances are that's what's going on there.
|
|
|
|
Post by Sean B. on Dec 19, 2004 2:02:23 GMT -5
The Nutone was missing the switch cap so Adam made a piece of cardboard to fit. The 3 blade Sears in the background, I know Adam was repairing one at one point, chances are that's what's going on there. He already said that about the Slimline... |
|
