|
Post by mc77338 on Mar 24, 2020 12:57:54 GMT -5
I love my two Hunter Model 22272 fans. I need new blades for them. They are 21" long.
As I measure them, the holes on the blades are further apart than all of the replacement blades on the market today. I see mine as A = 4 3/8" and B = 3 1/8" The most similar replacement blades for today's fans are A = 3 1/2" and B = 2 5/8" It seems to me that even if I made my own holes, they wouldn't fit on today's blades.
Do you know if this issue? If so, do you have a solution? My fans are under my porch roof in Florida. The wooden blades have delaminated a few times. The weight of the glue is throwing them out of balance. I would love to find new blades. Thanks for your help!
|
|
|
Post by Brian L. on Mar 24, 2020 13:58:45 GMT -5
I love my two Hunter Model 22272 fans. I need new blades for them. They are 21" long. As I measure them, the holes on the blades are further apart than all of the replacement blades on the market today. I see mine as A = 4 3/8" and B = 3 1/8" The most similar replacement blades for today's fans are A = 3 1/2" and B = 2 5/8" It seems to me that even if I made my own holes, they wouldn't fit on today's blades. Do you know if this issue? If so, do you have a solution? My fans are under my porch roof in Florida. The wooden blades have delaminated a few times. The weight of the glue is throwing them out of balance. I would love to find new blades. Thanks for your help! The fan that you have is a Hunter Original ceiling fan. I believe that your best bet in finding replacements is on ebay even though they can be a tad bit expensive. However do note that your fans are not Supposed to be exposed to any outdoor elements. This will shorten the finish & lifespan of the blades of your fan. Anyway, replacements can be found in the link down below. If you are worried about blades splitting again, I would try to search for a plastic set that has the same measurements. Anyway, good luck! www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR1.TRC0.A0.H0.Xhunter+original+ceiling+fan+blades.TRS0&_nkw=hunter+original+ceiling+fan+blades&_sacat=0
|
|
|
Post by mc77338 on Mar 24, 2020 14:35:09 GMT -5
Thank you for your kind and knowledgeable reply!
|
|