|
Post by Heath K. on Apr 30, 2014 17:30:25 GMT -5
so if any one has those types of blades let me know thank you
|
|
|
Post by Heath K. on Apr 30, 2014 15:45:47 GMT -5
I also noticed that the switch housing is loose and the screws are tight I checked
|
|
|
Post by Heath K. on Apr 30, 2014 13:25:22 GMT -5
It does happen sometimes..I still remember around 7 years ago, one mosque was being renovated, SMC fans that were originally there were replaced with KDK fans.. one of them had its motor label missing and 4 were wobbling due to minor accidents while installing... these things happen when installing which is why I always ensure I install the fans myself.. if anything happens I know how to fix it as I said I had full plans to but the wiring in this house are weird and are not what im used to. there were two beige wires and the fan wires differently from the videos ive watched the house wiring is jsut weird and backwards.
|
|
|
Post by Heath K. on Apr 30, 2014 2:22:18 GMT -5
|
|
|
Post by Heath K. on Apr 29, 2014 17:25:16 GMT -5
I didnt post an insult I was telling a story of how the guy who put in my fan was rough with it which upset me
|
|
|
Post by Heath K. on Apr 29, 2014 17:22:55 GMT -5
ill be keeping the original blades too but i would like to put some blades on it with the laguna style blade tips
|
|
|
Post by Heath K. on Apr 29, 2014 16:14:11 GMT -5
well its not that its just id like to have those laguna style tips on them if possible its that pointed blades are so common
|
|
|
Post by Heath K. on Apr 29, 2014 16:04:55 GMT -5
Im Looking to buy a set of four 42" blades that have that laguna style blade tips or something similar i don't like the point square or rounded tips if anyone has any blades let me know i want to get a new set for my cec top mounted spinner in stencil if possible if any will fit it thank you
|
|
|
Post by Heath K. on Apr 29, 2014 13:49:56 GMT -5
the motor is shot on the aura?
|
|
|
Post by Heath K. on Apr 29, 2014 4:16:51 GMT -5
So We had a friend come and install that nib cec spinner fan i got and he was carless with it slinging it around on the ceiling pressing blades against the ceiling took him hours to install it and in then end theres a scratch on the motor and on one of the blades it made me upset we ended up not paying him much for this he wired it wrong the first time and caused it to work in reverse by flipping the switch up it turned it off and down turned it on this caused a fuse to blow twice it took me showing him a pic of the old fan wired and him taking the switch cover off the wall switch to look at the wiring to get it right. he also kept accusing me of adding extra wires to the ceiling the wires in this house have been the same since it was built finally he said ok i''ll believe you what are you thoughts on this? I Had full plans to install it myself but the wiring in this house is backwards and different then what i'm used to
ps. the fan works fine now but it does have those scratches on it
|
|
|
Post by Heath K. on Apr 29, 2014 1:27:09 GMT -5
why does that nadair saturn have 4 pull chains ik one is for fan one is for light one is for reverse whats the other for
|
|
|
Post by Heath K. on Apr 28, 2014 22:45:13 GMT -5
the yellowing i guess is age its over it was made in 1987 and has been in my cousins house for years as long as ic an remember
|
|
|
Post by Heath K. on Apr 28, 2014 22:43:49 GMT -5
i also still have the blades from that airplane fan and rotor hub
|
|
|
Post by Heath K. on Apr 28, 2014 22:42:08 GMT -5
after it was removed it left awful marks and stuff from the decals and stuff i gotta pain over someday
|
|
|
Post by Heath K. on Apr 28, 2014 22:06:38 GMT -5
i used to have that air plane fan in my room but it didnt put out much air
|
|