|
Post by Jean Lemieux on Oct 23, 2008 23:19:15 GMT -5
Yeah its hard to see it wobbling in the video. With Fighter - Christina Aguilera covering the noise it probably makes due to the wobble.
Were you talking about the upper or the lower canopy?
|
|
|
Post by Cole S. on Oct 23, 2008 23:40:37 GMT -5
Yes, my camera doesn't pick up sound very good. When you're standing there, you can hear the steady clicking of wobbling fans.
The upper canopy. Well, I guess the whole fan!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 24, 2008 18:58:15 GMT -5
Too bad about the blenderfan pics, I'm still waiting.
What is the interesting location of the Regency?
The generic fans look like the ones Menards sell, I think they're Litex.
The footprint vent fans look like Concord but they could be Litex as well. Or even Fasco.
|
|
|
Post by Christian C. on Oct 24, 2008 19:11:45 GMT -5
Too bad about the blenderfan pics, I'm still waiting. What is the interesting location of the Regency? The generic fans look like the ones Menards sell, I think they're Litex. The footprint vent fans look like Concord but they could be Litex as well. Or even Fasco. the huggers could also be murray feiss
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 24, 2008 19:24:49 GMT -5
I dont think they're that old.
|
|
|
Post by Cole S. on Oct 24, 2008 19:38:52 GMT -5
The Regency is difficult to discribe. It's on a very high ceiling, with the stairs running up on the right of it. I may be going to her house again tomorrow, so I may get some pics
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 24, 2008 19:56:34 GMT -5
That'd be great.
Fans over stairwells is actually a good idea.
|
|
|
Post by Cole S. on Nov 2, 2008 17:51:35 GMT -5
I went to JCPenney today, in the West Acres Shopping Center. If You're ever in Fargo, this is the place to be, other than Habitat. ;D Here are the HRS' in the salon. One or two have been replaced with newer ones. There were many people, so the pics aren't all that great. These fans are all over the salon, maybe twenty in all, all spaced very close together. Here is the Canarm Pleasantaire in the fitting room, this proves that Canarm and Pleasantaire are one in the same, as it has both labels. The speed control is out in the open, in the middle of a wall. (That pic is sideways) I think it may be a secondhand fan, as it's a little beat up. Then again, it's in a fitting room, poor thing. We also went to Sam's Club, which underwent a remodel a few years back. Before the remodel, there were about a dozen Emerson Heat fans over the registers on a high ceiling. These were not the Blenderfan type, but the later kind with ball and socket mounting. I was too young to ask for them then, but I wish I had them.
|
|
|
Post by Jean Lemieux on Nov 2, 2008 20:21:18 GMT -5
Well those 56'' Industrials looks like Canarm. Some older and some newer. But the real Canarms are chunkier than that. These fans are very common in Montreal. Same for that 36'' one. My local Sears was renovated in 2001-2002 and they added on just like that in the lobby. This one is not really beat up, just a little scratched. That control is for the 36'' only? Did you tried to turn it on?(or they were too many peoples) I never heard of Greenheck but this control looks a lot like the original Canarm control. (middle on the page on the right) www.canarm.com/commercial/pdf/Controls.pdfPlesantaire is just another relabeled of Canarm.
|
|
|
Post by Cole S. on Nov 2, 2008 20:37:39 GMT -5
I've read the sticker on the 56" ones and on the old and new ones it clearly says HRS.
Yes, the control is for the one fan only, it's in the fitting room, across the store from the others. I didn't turn it on because some guy came in while I was taking the pics and thought I was bonkers. I have played with the speeds before though. It spins very fast, and has bad bearings.
Yeah, many companies distribute the very same controls under different labels.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 3, 2008 20:52:03 GMT -5
Most of those controls are made by KB and relabeled for the various brands.
I like the HRSes, or whatever they are, with the gold stripes.
|
|
|
Post by Andrew G. on Nov 3, 2008 21:21:49 GMT -5
I like the HRSes, or whatever they are, with the gold stripes. Uuuuhm... those are evergos (the ones with the chunky motors).
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 3, 2008 23:02:34 GMT -5
They looked like Evergos to me but he said HRSes, so I figured I'd see if he would confirm. Note that I said "or whatever they are".
Also note that HRS's top fan is, and has probably always been, relabeled Envirofans and Banvils. So this may include Evergos.
|
|
|
Post by Cole S. on Nov 3, 2008 23:06:05 GMT -5
It is FOR SURE HRS. If you don't believe me, you better get up here and check for yourself!! ;D There is no identification of Evergo on them at all.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 3, 2008 23:23:01 GMT -5
Is there identification for HRS?
If they are, they were made by Evergo for HRS.
|
|