|
Post by Jonathan A. on Dec 23, 2012 21:14:40 GMT -5
I went to the Boathouse restaurant, and it had 8 Hunter Originals, 3 52" Classic, and 5 60" Archive. The 1st fan may have problems with the pull chain or capacitor as the speed sequence is high, low, and low. The 2nd fan is having problems with the pull chain as the speed sequence is high, high high, and low with NO OFF POSITION! The 3rd fan works perfectly with the chain. The bent blades caused them to slow down and wobble, but they move lots of air.
|
|
|
Post by Jonathan A. on Dec 26, 2012 0:05:50 GMT -5
I also found out that all 3 pull chains were replaced with the same pull chains that the 1st 2 currently have, then the 3rd one's pull chain was replaced again with the one that looks like an original one. So do you think it's possible that the owner realized that it's a wrong pull chain, and later ordered Hunter the new pull chain for the 3rd one? And do you think that the 1st 2 will have the chains replaced with the ones used for Originals?
|
|