Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 23, 2012 21:14:00 GMT -5
Brian Hicks is the best Hunter repair person in the country, I forget if he is still authorized or not, but he's the only one I would trust.
|
|
|
Post by motion on Oct 24, 2012 5:21:15 GMT -5
I have pictures but don't know how to to post them.
|
|
|
Post by vanhalen5150 on Oct 24, 2012 10:01:22 GMT -5
Send them to my email mrfanman2u@yahoo.com and ill post them here.
|
|
|
Post by vanhalen5150 on Oct 24, 2012 23:25:21 GMT -5
I'm a little too lazy to actually post the links... here is the album they are in. 1984-1985 3 speed PSC motor. He says there is no reverse switch, correct? If this is true, not sure why the hell the brown and blue leads extend into the switch housing. Red is high, gray is medium and yellow is low, I think (if I'm not looking at it I always get the two mixed up) brown and blue are reversing leads. Something odd is going on here. The first electrically reversing motors, didn't use molex plugs, that didn't come about until a little later with 86' models as far as I have seen. He didn't take a picture that shows the amperage on the nameplate, but shows the model #. s21.beta.photobucket.com/user/mrfanman2u/library/
|
|
|
Post by vanhalen5150 on Oct 24, 2012 23:25:58 GMT -5
I was never authorized, I attempted to get authorization but I couldn't meet insurance and other requirements, but I did fill out the application and send it in. I do get dealer pricing for buying parts from them though. (I've bought like 3 grand in parts over the last 2-3 years)
|
|
|
Post by motion on Oct 25, 2012 8:15:32 GMT -5
The motor name tag has model #23304, catalog #23304-002, 120 volts, 2.5 amps,and 60 hertz on it. Thanks
|
|
|
Post by vanhalen5150 on Oct 25, 2012 9:14:52 GMT -5
Hmm.........
|
|
|
Post by motion on Oct 29, 2012 4:49:23 GMT -5
Brian, the Hunter name plate has the numbers 483076 stamped on. It didn't show well in a picture.
|
|
|
Post by vanhalen5150 on Nov 7, 2012 16:07:19 GMT -5
This is wired slightly different than you will wire yours.
You have one brown and one blue. You will wire either the blue or the brown to the red and white wires.
|
|
|
Post by motion on Nov 8, 2012 6:24:50 GMT -5
Brian, thanks so much. I plan on reassembling the unit and leave the wires out of the housing, if everything works I'll disassemble and have the exterior parts powder coated.
|
|
|
Post by motion on Nov 9, 2012 5:45:08 GMT -5
Update it works fine, blue to white and brown to red gave me the correct rotation. All boxed up and going to the powder coater today. Thanks
|
|