Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 24, 2004 14:58:09 GMT -5
This is the part that mounts the motor, housing, and downrod together in some fans. It's basically just a coupler which screws to the motor with a flange for the downrod, but it has a ridge on the bottom for the housing to fit in to. It was used on many older K55-type fans, such as pre-1980 Casablancas and Key Largos, as well as some better made import fans such as Ritzes. I need at least 1-2 of these, possibly more. They should be roughly 6" in diameter, I believe the ridge is 5 3/4" in diameter however if they're not all a standard size I'll need to get more exact measurements. Thanks Dan
|
|