|
Post by nene111 on Sept 22, 2022 21:00:56 GMT -5
Is this an aftermarket light fixture? I found this on marketplace but don't like the light kit but I don't see screws to remove it ibb.co/dQYFJXH
|
|
fantasticfans
Junior Member
I have a fan hobby, like most of us on here. In other words, I am just your average fan collector.
Posts: 170
|
Post by fantasticfans on Sept 23, 2022 6:27:46 GMT -5
That looks to be original. There are 2-3 screws on the bottom plate of the light kit. Remove them and you will see the 2 screws that go into the switch housing.
|
|
|
Post by nene111 on Sept 23, 2022 8:14:22 GMT -5
That looks to be original. There are 2-3 screws on the bottom plate of the light kit. Remove them and you will see the 2 screws that go into the switch housing. Ok so from my understanding that would leave the fan with no switch cap. Where could I find another one that fits it?
|
|
fantasticfans
Junior Member
I have a fan hobby, like most of us on here. In other words, I am just your average fan collector.
Posts: 170
|
Post by fantasticfans on Sept 23, 2022 14:57:15 GMT -5
That will be a very hard thing to find unless you homemake one. I have fans by the same OEM as yours that I also wanted to go with the switch cap on. In the end I just had to find a light kit that fit.
|
|