jtypo
New Member
Posts: 1
|
Post by jtypo on Oct 18, 2021 12:23:05 GMT -5
Have removed all apparent screws and nuts. Have tried twisting, lifting and turning. Not sure what the correct next move is. Any advice is greatly appreciated.
|
|
|
Post by Brian L. on Oct 19, 2021 16:25:16 GMT -5
Have removed all apparent screws and nuts. Have tried twisting, lifting and turning. Not sure what the correct next move is. Any advice is greatly appreciated.
You may just need to pull the motor housing off of the ceiling if you have removed those three nuts that secure that upper canopy to the plate. It might just be stuck because it is a tight fit.
|
|
|
Post by Obi-Wan Canopy on Oct 20, 2021 8:59:00 GMT -5
Have removed all apparent screws and nuts. Have tried twisting, lifting and turning. Not sure what the correct next move is. Any advice is greatly appreciated.
It's just stuck. If you removed all 3 nuts from the ceiling pan, all you can do is yank on it.
|
|