|
|
Post by markwelker on Feb 21, 2015 20:16:36 GMT -5
bought both of these for 40$ plus 50$ shipping. figured they were kinda cheap so they most likely will end up in my step dads second garage permanently. Attachment Deleted_ ones new in box and never been used. Attachment Deleted_ the other was used but only for a short amount of time and then taken down for more ware house space. jw any idea on how these rate compared to daytons or gold lines? |
|
|
|
Post by Jordan U on Feb 21, 2015 21:08:02 GMT -5
These are pretty cheap, but I like the canopies. $40 for both is not a bad deal though.
|
|
|
|
Post by markwelker on Feb 21, 2015 21:44:22 GMT -5
These are pretty cheap, but I like the canopies. $40 for both is not a bad deal though. I know. Only reason I got them lol |
|
|
|
Post by becausecanadia on Feb 21, 2015 22:32:22 GMT -5
Bet those blades weigh a ton.
|
|
|
|
Post by markwelker on Feb 21, 2015 22:58:24 GMT -5
Bet those blades weigh a ton. do they normally for litex? |
|
|
|
Post by Max C. on Feb 22, 2015 13:55:24 GMT -5
Do they normally for Litex? Mitch was joking... |
|
|
|
Post by markwelker on Feb 22, 2015 15:52:01 GMT -5
Do they normally for Litex? Mitch was joking... kinda figured that |
|
|
|
Post by becausecanadia on Feb 22, 2015 16:47:55 GMT -5
Do they normally for Litex? Mitch was joking... Generally cheap steel blades weigh alot. Couple them to a crappy underpowered motor and you've got a POS. So no I wasn't really joking. |
|
|
|
Post by markwelker on Feb 22, 2015 20:22:21 GMT -5
How about this? I'll weight the gold line, dayton and litex blades to see where their weights fit in?
|
|
|
|
Post by becausecanadia on Feb 23, 2015 7:22:05 GMT -5
How about this? I'll weight the gold line, dayton and litex blades to see where their weights fit in? Goldlines are aluminum so they'll probably be the lightest. Daytons I dunno if they're aluminum or not..Canarm blades are by far one of the heaviest..but the motor is big enough on them that they still perform okay. |
|
|
|
Post by Jordan U on Feb 23, 2015 7:22:47 GMT -5
That would be interesting to know. However, its not entirely based on the blades, the motors make a difference as well. The Goldline motor is going to be much more powerful than the Litex motor, and probably heavier also.
|
|
|
|
Post by markwelker on Feb 23, 2015 9:42:13 GMT -5
That would be interesting to know. However, its not entirely based on the blades, the motors make a difference as well. The Goldline motor is going to be much more powerful than the Litex motor, and probably heavier also. very true, ill also see what kind of force each motor provides I'm comparison too |
|
|
|
Post by Jordan U on Feb 23, 2015 10:58:40 GMT -5
very true, ill also see what kind of force each motor provides I'm comparison too How are you going to measure that? Another interesting specification in this comparison may be RPMs. |
|
|
|
Post by markwelker on Feb 23, 2015 12:13:15 GMT -5
very true, ill also see what kind of force each motor provides I'm comparison too How are you going to measure that? Another interesting specification in this comparison may be RPMs. not sure yet was thinking maybe rpms but as to the force the motor idk atm :/ I'll look into ideas later after work |
|
|
|
Post by Jordan U on Feb 23, 2015 15:39:38 GMT -5
RPMs and HP may be available from the manufacture if you can find the specs. I'd expect Dayton and Banvil to have those specifications listed, not sure about cheaper stuff like Litex though. I'd be curious to know how many CFMs the Litex moves.
|
|
