|
Post by Heath K. on Dec 22, 2014 0:45:37 GMT -5
So Far this has only happened once but when I pulled the chain to change the speed it made a noise like a car while grinding trying to spin with the brake on when I turned it off and and back on it was fine did I not pull the chain hard enough or something it made an awful noise like something spinning while in brake mode what would cause it fan seems fine now just wondering if this is serious
|
|
|
Post by Heath K. on Dec 22, 2014 15:13:44 GMT -5
anyone have an idea?
|
|
|
Post by fan1968 on Mar 10, 2015 16:27:52 GMT -5
Hmm. Fans don't have a "brake mode". If you push the blades they spin freely. It's probably time for new bearings.
|
|
|
Post by Jordan U on Mar 11, 2015 8:29:17 GMT -5
Probably the bearings are going bad, or some grit or whatever got in there. Bearings will likely need to be replaced. You could try oiling the bearings, but I've never had good success with that.
|
|
|
Post by Heath K. on Mar 12, 2015 21:21:54 GMT -5
it stopped after I oiled it a few times it runs quite now
|
|
|
Post by Jordan U on Mar 13, 2015 9:53:03 GMT -5
it stopped after I oiled it a few times it runs quite now Good !
|
|